Learn the wrench on a Saturday, not on the shoulder
A loose bike seat, a flat tire and one adjustable wrench. Here's how to learn the basics while somebody who knows how is still standing next to you.

Quick answer: Get an adjustable wrench and a set of hex keys. Fix one loose thing on your own bike with a person who knows how standing beside you. Then practice loosening the lug nuts on a car in a driveway, long before you're ever on a roadside.
Start with what's already loose
Your bike seat tips back every time you sit down. The handlebars twist if you lean on them. Good. That's your first lesson, and it's free.
Find the bolt. Slide the wrench on until it fits snug with no wiggle, then turn it left to loosen and right to tighten. Yes, "lefty loosey" is a real thing people say, and yes, it works.
An adjustable wrench has one fixed jaw and one that moves. Put the wrench on so the pull goes toward the fixed jaw. The moving jaw should trail. Do it backward and the wrench slips and chews up the bolt.
Pull the wrench toward you. Don't push it away. When it slips, and it will, your hand goes back toward your body instead of forward into a fender or a chain ring. Knuckles heal slower than you'd like.
Tighten until it resists, then give it a little more. That's "snug." Cranking on it with everything you've got is how threads get stripped and bolts snap. Most beginners overtighten. The bolt isn't going anywhere if you stop when it pushes back.
The part nobody tells you about sizes
Bolts come in metric and in what mechanics call SAE, which is the old inch system. A wrench that's almost the right size is the wrong one. It'll round off the corners of the bolt head, and then you've got a much bigger problem than a wobbly seat.
If the wrench slides on and wobbles, go down a size. If you have to hammer it on, go up. The right one slides on and sits flat.
Adjustable wrenches are forgiving, which is why they're the right first tool. Once you know your sizes, a fixed combination wrench grips better. Most of what's on a bike takes hex keys, the small L-shaped ones, so get a set.
If a bolt is rusted and won't budge, don't throw your weight into it. Spray some penetrating oil on it, let it sit for ten minutes, and try again. Patience beats muscle on a rusty bolt.
Wear safety glasses if you're working on anything that could spring or fling. They cost almost nothing, and nobody looks silly with two working eyes.
Do the tire before the tire does you
Here's where it matters most. Sooner or later you'll be driving and a tire will go flat.
Right now, today, open your trunk. See if there's a spare, a jack and a lug wrench. Plenty of newer cars don't have a spare at all, only a sealant kit, and you want to know that in your driveway instead of on the shoulder. The owner's manual shows where everything lives and where the jack goes under the frame. Read that page.
Then practice with a parent or another adult who's done it. The order matters:
- Park on flat, level ground with the parking brake set.
- Loosen the lug nuts a half turn while the tire is still on the ground. A lifted wheel just spins.
- Jack up the car at the spot the manual shows.
- Remove the nuts, swap the wheel, thread the nuts back on by hand.
- Lower the car, then tighten in a star pattern, not around in a circle. It seats the wheel evenly.
The annoying truth: the nuts are often on far tighter than you expect, because a tire shop put them on with an air tool. Set the wrench so the handle points roughly horizontal and press down with your foot while holding onto the car for balance. Smooth pressure works. Bouncing on it doesn't.
Never put any part of your body under a car held up by a jack alone. Never work on a slope. And check your manual for the correct tightness, since it varies by vehicle.
Know the honest limit too. On a busy road, in the dark, or anywhere you don't feel safe, changing a tire is the wrong move. Get the car as far off the road as you can, stay buckled in or get well clear of traffic, and have a roadside service or a tow come to you. If anything feels off about who's stopping to "help," contact local police. Knowing how the job works is what lets you decide calmly, whether you do it yourself or wait for help.
Who to ask, and how
Somebody in your life already knows this stuff. Dad, a grandfather, an uncle, a neighbor with a garage, an older brother, a friend's mom who rebuilds engines. Most of them have been waiting years for someone to ask.
Say it plainly: "Can you show me once, then let me do it?"
That second half is the whole point. Some people will say, "Here, let me," and take the wrench out of your hand. They mean well. Be kind and be firm: "I want to do it. Just tell me what I'm doing wrong." You don't learn a wrench by watching somebody else use it. And having a backbone about it is part of knowing your own worth, which you can read more about in decide what you're worth before somebody else does.
Leave it better than you found it. Wipe the tools down before they go back in the box, and put them in the box. Sweep the spot where you worked. Bring cold drinks or something from the bakery. The person who gave up a Saturday for you will remember how you left the garage long after they forget the bolt.
Then pass it on. When a friend's bike chain slips or her seat sags, you're the one who says, "Hang on, I've got a wrench." That's a good thing to be known for.
Can't find the time? Saturdays vanish into a screen faster than anyone admits, and how to get your hours back without deleting a single app is a decent place to start carving out one.
What to buy
A starter kit is small and cheap:
- An 8-inch adjustable wrench
- A set of hex keys
- A combination wrench set in both metric and SAE, if you want to go a step further
- Two screwdrivers, one Phillips and one flat
- A can of penetrating oil
- Safety glasses
Keep them in one box with your name on it. Don't lend that box out unless you get it back cleaner than it left.
Nobody is born knowing which way is lefty. Somebody put a wrench in their hand once and stood there while they fumbled with it. Go find your somebody.
Cal Brennan
Fitness
Strength coach. Trains fathers, tradesmen and desk workers, which means programs that survive a bad week.
Read next
