Grab bars that look like they were always part of the bathroom
A well-chosen grab bar reads as a towel bar. Here's how to pick one, where it goes, and how to mount it so it holds your full weight.

Quick answer: Buy a real grab bar, not a suction-cup one and not a towel bar. Pick a finish that matches your faucet. Screw it into a stud or solid blocking. Do it now, while it's a design choice and not a reaction.
The towel bar that fails at the worst moment
Picture a bathroom with a handsome towel bar beside the tub. A person steps out, the floor is wet, and a hand reaches for the nearest solid-looking thing. The bar is held by two small screws in drywall. It comes off the wall.
Towel bars, ceramic soap dishes and toilet paper holders aren't built to take a person's weight. They're designed to hold a towel. Most are fastened with little more than drywall anchors, and drywall is chalk with paper on it.
Suction-cup grab bars are the other trap. They're cheap and easy, and they release without warning. Wet tile, soap film and a change in temperature are all it takes. Even the ones with a little red indicator are a bet you don't need to make.
A real grab bar is a different object. It's screwed through the wall surface into wood behind it, and it's tested to carry a load. The commercial accessibility standard, the ADA, calls for bars that hold 250 pounds. That's a sensible benchmark for your own home, even though the law doesn't require it there. Look for a stated weight rating on the box or the maker's spec sheet. If there isn't one, move on.
What makes one look like it belongs
The clunky hospital look comes from three things: bright institutional chrome, a plain straight tube, and a spot on the wall that makes no sense. Fix those and the bar nearly disappears.
Match the finish. Brushed nickel, matte black, polished chrome, oil-rubbed bronze and brushed brass are all available in real grab bars. Match your faucet and towel hardware and it reads as part of the set.
Pick a shape that's built in. Some bars have a gentle curve or a decorative end cap. Others are made to look like a classic towel bar, and they carry a weight rating. A few toilet paper holders and shelf-style ledges are built as true grab bars. Check the rating before you trust one.
Mind the grip. A bar about 1¼ to 1½ inches across fits a hand well. Smooth, wet chrome is slippery, so a bar with a light texture or knurled grip is worth having, especially inside the shower. Leave about 1½ inches between the bar and the wall. Less than that and your fingers or forearm can wedge.
Mind the placement. A bar set at a deliberate height and angle looks designed. One stuck wherever the stud happened to be looks like an afterthought. Plan the whole bathroom, then mount.
Where they go
Think about where you actually move, not where a diagram says to put one.
- Tub or shower entry. A vertical bar on the wall or the edge of the opening gives you something to grab as you lift a leg over. This is the single most useful spot.
- Inside the shower. A horizontal bar on the long wall, roughly 33 to 36 inches off the floor, is the standard height. Put it where your hand lands when you turn to reach the water controls.
- Beside the toilet. A horizontal bar on the side wall, or one behind it if there's no side wall. Standing up from a low seat is where many people first notice a bar would help.
- Vanity and doorway. Rarely needed, but a sturdy countertop edge or a bar by the door can help if you've got a step down.
If you're replacing a vanity or retiling anyway, tell the contractor before the walls are closed up. Wood blocking set between the studs costs almost nothing at that stage, and it means a bar can go anywhere later.
Mounting, step by step
This is the part that decides whether the bar holds.
- Find the studs. A stud finder works. A small strong magnet dragged along the wall can also find the screw heads in the drywall.
- Mark the height and mounting points. Hold the bar up and check it against your own reach, standing and, if relevant, sitting. Mark with painter's tape.
- Drill through tile with the right bit. Use a carbide or diamond bit made for tile, drill slowly, and put a piece of tape over the spot so the bit doesn't skate.
- Fasten into wood. Long screws into stud or blocking. If a stud isn't where you need it, use heavy anchors made for the bar and rated by its maker. Follow their instructions exactly. Don't borrow whatever's in the junk drawer.
- Seal the holes. A bead of silicone around the mounting plate keeps water out of the wall.
- Test it. Grab the bar and put your full weight on it, with your feet on the floor first. If anything shifts, you've learned it on a good day.
If you don't want to do it yourself, hire a licensed handyman or contractor and ask what he or she is fastening into. "The drywall anchors that came in the box" is the wrong answer.
Install it before you need it
Waiting until after a fall or a surgery is the usual pattern. Then the bar goes up fast, in a hurry, in whatever finish was in stock, and it looks like it.
Put it in now and it's a bathroom upgrade. You'll grab it a hundred times without thinking, and when you need it, your hand already knows where it is. Your guests won't notice it. The grandchildren will use it as a towel bar and be right in spirit.
It also costs less now. Kept up with a little strength work, as in what to keep lifting after sixty and what to stop, and the habits in what actually keeps knees and hips going past seventy, it's one more piece of a house that works for decades.
If you're weighing a smaller place, downsize the house, keep the equity covers the money side. Either way, look for a bathroom that already has backing in the walls, or plan to add it.
Who pays, and who can help
Original Medicare generally doesn't pay for grab bars, since they're a home fixture and not medical equipment. Some Medicare Advantage plans offer a home safety or bathroom benefit, and those vary a lot. Call your plan, or 1-800-MEDICARE (1-800-633-4227), or read Medicare.gov, to see what's available this year.
Your doctor can refer you to an occupational therapist for a home safety visit. A therapist will watch how you actually move through your bathroom and tell you where bars would do the most good. For local help with home repairs and modifications, the Eldercare Locator at 1-800-677-1116 or eldercare.acl.gov can point you to programs near you.
A good bar costs less than a night in a hotel, and it'll outlast the faucet. Put it up like you meant it.
This is general information, not medical or financial advice. For questions about your own home or health, ask your doctor or an occupational therapist, and for Medicare questions, the free SHIP counselors at 1-877-839-2675 or shiphelp.org.
This is general information to help you think things through, not medical, legal or financial advice. Please check with your doctor, pharmacist or a qualified adviser before making a change.
Marcus Vale
Editor-in-Chief
Twenty years in magazines, most of it deciding what to cut. Writes about work, discipline and the decisions that compound.
Watch
Worth an hour of your evening
More from BRO Seniors.
From channels we rate. Plays on YouTube.
Read next
