The $3,600 job that paid you fifty-two dollars an hour
Your estimate was probably right about the work. It was wrong about everything around the work, and that's where the profit went.

Quick answer: Track every hour a job touches, not just the hours on site. Divide what's left after materials by that total. If the number is well under what you planned, the leak is almost always the unbilled hours around the work, and you fix it in the quote, not by working faster.
The job that looked fine
Say you quote a bathroom tile job at $3,600 flat. Materials come to $900. That leaves $2,700 for your labor, and you figured thirty hours on site. Ninety dollars an hour. Good job, good client, good month.
Now add up what the job actually took.
- 30 hours on site, exactly as estimated
- 4 hours driving to the walkthrough and writing the quote
- 6 hours on supply runs, including the trip back for the wrong trim piece
- 5 hours of texts, calls and a second walkthrough because the homeowner changed the niche
- 7 hours tearing out and redoing a section when the wall wasn't flat
That's 52 hours. You earned $2,700 over 52 hours, or about $52 an hour. And that's before the truck, the fuel, the insurance and the tax bill.
Notice something. Your estimate of the work was dead on. Thirty hours of tile took thirty hours. The job didn't go wrong where you were looking. It went wrong in the twenty-two hours you never put on paper.
Why you never see it
Money comes in as one number. A check for $3,600 feels like a win whether the job took four days or nine. Nothing in your day rings a bell when a job goes from profitable to merely busy.
The hours are also scattered. Ten minutes in the driveway, a lunch-hour call, an evening spent texting photos back and forth. None of it feels like work, so none of it gets counted. Add it up across a month of jobs and you've lost a full week.
And memory lies in your favor. You remember the job as "about a week." The calendar says otherwise.
Run the test for four weeks
You don't need software. A notes app and discipline will do.
- Start a log per job. One line per entry: date, minutes, what it was. Include driving, shopping, quoting, calls, texts that ran past a couple of minutes, paperwork, and redoing anything.
- Log the small stuff on purpose. The fifteen-minute call is the one that disappears. If it touched the job, it goes in.
- Close each job with one calculation. Revenue, minus materials, minus subcontractors, divided by total hours. That's your real hourly number for that job.
- Compare it to what you planned. Write both numbers at the top of the page. The gap is the lesson.
- Tag the biggest leak. Travel, supply runs, client changes, rework, or admin. Pick one word per job.
After four weeks, the same word will show up again and again. For most operators it's one of two things: changes the client asked for without a price attached, or trips to the supplier.
If you run a crew, use what each person costs you per hour, wages plus payroll taxes and insurance, not just the paycheck number. Your accountant can tell you the right loaded rate for your shop. Don't guess at it.
Fix the quote, not the pace
The tempting answer is to work faster. Resist it. Speed is how you end up with the wall that wasn't flat, the shortcut that comes back in six months, and a name that loses its shine. You serve the customer by doing the job right. You protect yourself by pricing it honestly.
Price the edges in. If supply runs average five hours a job, that's part of the job. Build it into the number or charge for it as a line item. Same with the walkthrough and the quote visit. Plenty of shops now fold a fixed amount into every estimate for travel and procurement, and clients accept it without blinking when it's explained once.
Put changes in writing before the work, not after. A one-page change order does it. The client adds a niche, you write down the price and the added time, they sign or initial it, then you build it. Be friendly about it. Be immovable about it. "Happy to do that, and it'll add this much" is a complete sentence. Doing it free once teaches the client that changes cost nothing, and they'll remember.
Set a minimum. Small jobs have the same drive time, the same supply run and the same texts as big ones. A $400 job that eats eight hours is a $50 job that you're calling $400. Decide the smallest job that's worth your truck leaving the driveway, and say it kindly when someone calls under it. Refer them to somebody who likes small work.
Pad where your own log says to. Don't pad everything by twenty percent out of nerves. Pad the specific category where your last ten jobs bled, by the amount they bled.
When the estimate itself is the problem
Sometimes the on-site hours run over too, and that's a different fix. Look at the pattern.
- Is it always demolition and prep? Then you're quoting finished work and forgetting the ugly part before it.
- Is it always jobs in older houses? Then older houses get a different price and a clause about hidden conditions.
- Is it always one kind of client, the one who hovers, changes their mind and pays in thirty days instead of ten? Then that client costs you double, and the honest move is to charge for it or pass.
Some jobs look good on paper and still can't be saved. A client who disputes every invoice and needs three calls a day isn't profitable at any quote you'd dare to send. Walking away from that job is not being difficult. It's being a business. And if the problem is the invoice sitting unpaid, most late invoices are a process problem, and you can fix that part without firing anyone.
Where this lives afterward
One job's number is a lesson. A running list of them is a management tool. Put "real hourly rate, last five jobs" on the same sheet you check every Monday. Run your week off one page of numbers walks through how to build that page, and it takes about ten minutes to add a line.
When you read your books each month, compare the jobs you thought were your best against what the log says. Reading your own profit and loss shows you where to look for the gap between revenue and what's left. Sometimes your favorite customer turns out to be your most expensive one.
Raising prices is the part most people dread. You don't need a sales voice for it. You need a number you can defend, and now you have one. Selling without the sales voice covers how to say it without apologizing.
The one habit
Before you send the next quote, pull up the last three closed jobs of the same kind and look at the hours, not the invoices. Then price the job you're actually going to do, including the drive, the supplier, the phone and the wall nobody told you about.
The check will still say $3,600. The only question is how many hours you're giving away to cash it.
Ray Okonkwo
Money & Business
Former commercial banker turned small-business owner. Covers salary, credit, margins and the arithmetic nobody does before signing.
Watch
Worth an hour of your evening
More from Business.
From channels we rate. Plays on YouTube.
Read next
