Smallmouth in the Rocks Want the Tube Dragged, Not Hopped
Most anglers work a tube like a bass jig and wonder why they lose it in the riprap. Slow down, stay on the bottom, and watch your line.

Quick answer: Rig a 3.5-inch tube on a 1/8 to 1/4 ounce internal jig head. Cast to the edge of the rock, let it hit bottom, then drag it a foot at a time with long pauses. Most bites come on the pause or the fall, and they feel like nothing at all.
The mistake that costs you fish
Picture a riprap bank at first light. You've got a tube on, and you do what you'd do with a bass jig. Snap the rod up, let it fall, snap it up again.
It works fine in open water. In rock, it's a bad habit.
Every time you lift hard, the jig head leaves the bottom and drops back into a crack. Now you're snagged. And when you aren't snagged, the tube is moving like a bait in a hurry. A smallmouth sitting beside a rock to ambush a crayfish doesn't want a bait in a hurry. It wants something crawling away, a little hurt, easy to catch.
So drag it. Hold the rod low, around nine o'clock. Reel slowly, or sweep the rod a couple of feet to the side, then stop. Let the tube sit. Move it again. A tube dragged this way slides over the tops of rocks, tips into the gaps, and wobbles when it stops. That wobble is the whole trick.
The rig
Keep it simple, because you're going to lose some.
- Tube: 3.5 inches is the all-around size. Go to 3 inches when the fish are finicky or small, and 4 inches when the water's rough or murky.
- Jig head: an internal tube head, the kind that slides inside the body with the hook point poking out the front. Use 1/8 ounce for water up to about eight feet and 3/16 to 1/4 ounce for deeper water or current. Use the lightest head that still keeps you in contact with bottom.
- Rod and reel: a 6'10" to 7'2" medium-power spinning rod with a fast tip. You want to feel the rock and still have some give when a fish loads up.
- Line: 8 to 10 pound fluorocarbon straight through, or 10 to 15 pound braid with a leader of 8 pound fluorocarbon. Braid carries bites to your hand better. Fluorocarbon sinks and stays cleaner on the bottom. Pick one and learn it.
- Colors: green pumpkin, brown, and smoke with a little flake cover most water. Go natural in clear water. Try a touch of orange or chartreuse in stain.
Stuff the hollow body with a bit of scent or just a pinch of the tube's own tentacles. Don't overthink it. A tube is a crayfish or a goby to a smallmouth, and the color matters less than the speed.
Where to put it
Rock is a big word. Smallmouth use it for three things: cover, food, and a break from current.
Fish the places where rock changes. A point that runs out and drops. The seam where riprap meets gravel or sand. A single boulder sitting alone on a flat. The downstream side of a ledge in a river.
In a river, cast upstream and let the tube tumble back toward you. Keep just enough tension to feel it tick off the bottom. In a lake, cast parallel to the rock and walk the bait down the face, then fan casts out into the deeper edge.
Depth shifts with the season. Early in spring you'll often find them shallower in sun-warmed rock. In summer they may sit deeper on shaded drop-offs, and the first and last hour of light can bring them back shallow. Fall can bring them up again. None of that is a rule, so let your fish finder or your own eyes tell you what's real that day. If you need help with the screen, read a fish finder right and skip the features you won't use.
What the bite feels like
Rarely a thump. You'll feel one of these:
- A soft tick, like a pebble knocking the line.
- The tube feels heavy, as if it's caught on a rock but a rock doesn't pull back.
- The line jumps sideways or goes slack when it should be tight.
Any of those, reel down until the line's tight and sweep the rod to the side. Don't snap it over your head. A smallmouth often takes a tube down head first, and a controlled sweep seats the hook without ripping it free of a thin jaw.
Getting unstuck
You'll snag. Accept it. Jig heads are cheap enough that you should buy a handful of extras and stop treating each loss as a failure.
Before you pull, drop the rod tip and give it slack for a few seconds. The tube's body floats, and sometimes it lifts the head out of a crack on its own. If it doesn't, move so you're pulling from the opposite angle you came in at. If you're in a boat, motor around and pull from the other side. A steady pull from the reverse direction frees more jigs than a hard yank ever will.
To cut down on hang-ups, skin-hook the point. Push the barb just under the surface of the plastic on the top of the tube, so it's covered but still pops through on a hookset. It costs you a few hooksets. It buys you a lot more casts.
When to switch to something else
The tube is a great first choice in rock. It isn't the only one.
- A 4-inch finesse worm on a light head, the so-called Ned-style rig, when fish are picky or pressure is high.
- A 3-inch craw or creature bait on a 1/4 ounce jig for heavier rock and deeper ledges where you want a bigger profile.
- A 4-inch grub on a round head when you'd like to swim it slowly above the rocks and cover water.
If you've dragged the tube properly through good water for thirty minutes and nothing's happened, change the presentation before you change the lure. Slower. Shorter hops. Longer pauses. Then switch the plastic.
Keep one, release one, know the rules
Smallmouth are good eating and they're also worth putting back. Both are fine. What isn't fine is not knowing the rules.
Seasons, size limits, slot limits and daily bag limits for smallmouth vary a lot by state and province. Some waters are catch-and-release only during part of the year, often around the spawn. Some have a size window you have to stay inside. Check your own state or provincial regulations before you go, every year, because they change. Our piece on size limits, slot limits and the rules that keep fish coming explains how to read them.
If you're letting one go, wet your hands, support the belly, keep it out of the water for as little time as you can, and hold it facing the current until it swims off on its own. How to release a fish so it actually lives covers the details.
Then reel up, cast back to the same rock, and let the tube sit a little longer than feels natural. That's usually when it happens.
Wes Dunbar
Country & Skills
Grew up on an acreage and never quite left. Covers trucks, trades, land, and how to do the thing yourself.
Watch
Worth an hour of your evening
More from Fishing.
From channels we rate. Plays on YouTube.
Read next
