Skip to content
GuideEvergreen guide

Your quote has an expiration date, whether you wrote one or not

Material prices moved after you quoted the job. A clear rule for when to eat it, when to rebid, and how to ask without sounding like you're shaking someone down.

By Ray Okonkwo · Money & Business5 min read
Your quote has an expiration date, whether you wrote one or not

Quick answer: Rebid when the cost swing is bigger than the slice of profit you're willing to give up, and only if the paperwork or the calendar still lets you. Do the math in dollars on this job, not in percent on the commodity.

Start with the dollars, not the headline

A supplier calls and says lumber is up 12 percent. That number means nothing yet.

Say you quoted a deck at $18,000. Materials are $5,400 of that. You priced for 15 percent profit, so you're expecting $2,700. A 12 percent jump on the materials adds $648. The price of the job moved 3.6 percent. Your profit just dropped by almost a quarter.

That's the part people miss. Materials are a small slice of the price, but profit is a thinner slice still, so a modest-sounding increase can take a big bite out of it.

So the test is simple. Take the extra cost and divide it by the profit you expected on the job. Call it the bite.

  • Under 10 percent: eat it. Rebidding over $270 makes you look petty and costs you more in goodwill than you'd recover.
  • Ten to twenty-five percent: it depends on the next section.
  • Over twenty-five percent: you're about to work a quarter of the job for free. Rebid, or restructure.

Those cutoffs are a starting point, not a law. A shop with fat margins can swallow more. A shop running 6 percent can't swallow anything. Know your own number. If you don't, read your own profit and loss in ten minutes a month and find out before the next supplier call finds out for you.

What state is the job in?

The bite only matters if you still have a move. Every job sits in one of three states.

Quoted, not signed. You have all the room in the world. Your quote is an offer, and an offer that's weeks old was priced on weeks-old costs. Reprice it before the customer says yes. If the customer signs your old number tomorrow, you've just agreed to the lower price yourself. Nobody forced you.

Signed, materials not bought. This is where the contract does the talking. Read it. Is there an escalation clause? A price-validity window? A line saying materials are priced as of a date? If yes, you can invoke it, and you should. If no, you're in a harder spot. You can still ask, but you're asking, not enforcing.

Signed, materials bought. Done. Your cost is locked and so is your price. Eat it, log the lesson, and don't dress it up with a surprise "fuel and supply adjustment" on the final invoice. A signed price is a handshake. You made it, so you keep it. That's what separates a contractor from a guy with a truck.

The better habit is buying the risk off the table

Most of this problem is fixed at signing, not at rebid time.

When a customer signs and the material is volatile, buy it that week. Put it in the shop, the yard, or the supplier's will-call. Take a deposit sized to cover it. Now you've turned an open exposure into a closed one. The price can do what it likes.

If you can't store it, ask your supplier for a written price hold. Many will give you 14 or 30 days on a stocked item if you ask. Get it in an email with an end date.

And put an expiry on every quote you write. Thirty days is common. Fifteen is smarter on anything that swings. One line: "This quote is valid through [date]. Material pricing is subject to change after that date."

Before you pick up the phone

Get your paper in order. A rebid with no evidence sounds like a story. A rebid with an invoice sounds like arithmetic.

  • Pull your original supplier quote and the new one, same items, same quantities.
  • Isolate the line items that actually moved. Don't pad in the ones that didn't.
  • Add only the difference. No markup on the increase unless your original quote marked up materials and you're being consistent.
  • Check your contract language and note the date you quoted and the date you signed.
  • Decide your floor: the lowest number at which the job still makes sense for you.

That last item matters most. Know what you'll walk away from before you ask for a dime.

The call

Make it a call, not a text. Short, direct, specific.

"Hey, Mike. Quick heads up on the deck. The decking boards I priced in March have gone up, and I've got the supplier's new sheet. It adds $648 to the job. I wanted you to hear it from me before we order, and I wanted to show you the numbers. Can I send them over?"

Notice what's missing: no apology and no speech about the economy. You're not begging and you're not accusing. You're giving a straight account of a real cost to a man who will respect it if it's real.

Then offer options, because options keep it a conversation:

  1. Pay the adjustment and we order today.
  2. Pay a deposit now and I lock the material at today's price.
  3. Swap to a comparable product that comes in under the old number.

Most people take option two. They don't hate the price. They hate the surprise. Take the surprise out and you've kept the job.

If you'd like to sharpen the conversation itself, selling without the sales voice is the right kind of reading. The honest version of this call is the same skill.

When rebidding is the wrong move

Sometimes the math says rebid and the better call is to hold.

A repeat customer who sends you three jobs a year. A small job where the dollars are real to you and trivial to them. A relationship where one clumsy ask costs you every referral that comes after. In those cases, eat it once, tell them you did, and fix your quoting. A $400 hit that buys loyalty is cheap. A $400 hit you swallow in silence is just a loss.

The opposite mistake is worse. A man who never rebids anything, ever, is quietly paying his customers' price swings out of his family's income. Service with a backbone means you give people a fair deal and you don't let anyone, including the market, walk over your household. You're allowed to run a business that makes money.

Fix the next quote

After every surprise, write down which line moved and by how much. Do it for six months and you'll see which materials bite you every time. Those are the ones to quote shorter, buy earlier, or price with a visible buffer.

Check the weak lines every week. A short list of numbers to look at every Monday should include your top two or three volatile materials, so a price jump reaches you before it reaches a quote.

The rule that holds up under every price swing: your word is good once it's signed, and your quote is only good until it expires. Write the date on it.

Ray Okonkwo

Money & Business

Former commercial banker turned small-business owner. Covers salary, credit, margins and the arithmetic nobody does before signing.

Watch

Worth an hour of your evening

More from Business.

From channels we rate. Plays on YouTube.

    Alex HormoziNov 21

    Cold leads feel like trash until you learn how to convert them.

    Alex HormoziNov 21

    When we start a business, I’m convinced debt is mandatory:

    Alex HormoziNov 21

    Because I did it that time, I can do it again.

    AcquisitioncomJul 1

    5 Ways to Scale ANY Business