A work shirt collar frays at the fold, so check the fold first
The collar is the first thing to go on a hard-worked shirt. Here's how to spot a weak one in the store, and how to save one you already own.

Quick answer: Collars fray along the fold, where the fabric bends, rubs your neck and soaks up sweat. Buy a shirt with tight topstitching close to the edge and a heavy, tightly woven cloth. Then put one row of hand stitching along the fold before it ever shows wear.
The shirt is fine everywhere else. The sleeves are soft, the elbows are holding, the body has faded the way you wanted. But somewhere around October, the collar fold turns pale and then grows a little fringe, like a hay bale left out in the rain.
You didn't do anything wrong. You wore it. The collar just has the hardest job on the shirt and, usually, the least engineering behind it.
Why the fold goes first
A collar folds over on itself, so every thread along that crease is stretched on the outside and crushed on the inside. Every time you turn your head, it rubs against your neck. Every time you shoulder a jacket, a pack strap or a canvas coat, the fold takes the friction.
Add sweat and dust, and you've got a seam of cotton being sanded forty times an hour.
Cotton threads are also short. Once the surface of the fold wears through, the fibers lift and unravel. That fringe is the fabric telling you the fold has opened up. It won't stop on its own.
The thirty-second check in the store
Most people look at the color and the fit. Turn the collar up and look at it instead.
- Topstitching. A good collar has a row of stitching close to the outer edge, about an eighth of an inch in. It holds the layers flat and takes the strain off the fold. No stitching, or a row set far back, means the fold is on its own.
- Stitch density. Look at the stitches. Tiny and tight is good, roughly a dozen or more to the inch. Big, loose stitches mean it'll open up and snag.
- The fold itself. Pinch it. A fold that already looks creased, shiny or thin is a collar at the end of its first week.
- The lining. Many collars have a stiffener glued in. Press the collar between two fingers. If it bubbles or feels papery, the glue will fail after a few hard washes and the collar will curl. A sewn-in lining stays put longer.
Then look at the cloth. A heavy twill or a thick oxford, woven tight, holds up better at the fold than a thin, flimsy poplin that feels nice in July and gives out by September. A shirt that's already been washed soft is half worn before you start, so budget for that.
If you're after a shirt that works on the job and still looks right afterward, this piece on workwear that holds up off the clock covers what to keep an eye on.
Stop it before it starts
This is the part nobody tells you. You can reinforce a new collar in about fifteen minutes with a needle, and it'll often outlast the rest of the shirt.
- Match the thread to the cloth. Cotton or cotton-poly, in the shirt's color. Buy a spool, not a pre-wound card.
- Fold the collar the way it sits when worn, then flatten it.
- Sew a row of small, even stitches about an eighth of an inch from the fold edge. Use a backstitch so it's strong. Keep the stitches the same length as the factory ones.
- Knot it off inside the collar where nobody sees it.
You're adding a belt to the pants. The thread takes the abuse so the fabric doesn't have to. If the thought of sewing makes you wince, any alterations shop will do it for a few dollars. It's worth asking.
Wash it like you want to keep it
Heat and harsh washing do half the damage. A few habits help.
- Wash cold or warm, not hot.
- Skip bleach. It eats cotton at the fold first.
- Pull the shirt out of the dryer before it's bone dry, or hang it. Dryer heat bakes in shrinkage and stiffness.
- Don't let a sweaty shirt sit balled up in a hamper for a week. Salt and moisture weaken cotton, and it's the collar that stays wettest.
- Rotate. Two or three shirts worn in turn will outlast one worn every day, because the fibers get a rest.
When it's already frayed
Don't throw the shirt away. If the body is sound and the shirt fits, take it to a tailor and ask for the collar to be turned. They take it off, flip it so the unworn side faces out, and sew it back on. It's an old trade and a real service. It's not cheap enough to do on a bargain shirt, but on one you like and that fits you, it's cheaper than starting over.
If it's only just started, trim the loose threads with sharp scissors, cut close and clean. Don't pull them. Then stitch the fold the way described above. A caught fray stays small.
A collar with a little honest wear isn't a disgrace. A man who works in his clothes will look like it, and that's fine. But there's a difference between a collar that's earned its softness and a collar that's coming apart because nobody spent fifteen minutes on it.
For the rest of the wardrobe, the same logic runs through buying jeans you can actually work in and buying the work jacket once. Check the stress points first, because that's where the money goes.
Look at the fold before you pay. Then give it a row of stitches on the way home.
Tobias Reed
Style & Grooming
Spent a decade in menswear retail watching men buy the wrong size. Believes fit is ninety per cent of it and says so weekly.
Watch
Worth an hour of your evening
More from Country Style.
From channels we rate. Plays on YouTube.
Read next
