Skip to content
GuideEvergreen guide

Find your gas shut-off before you need it

Ten minutes, one wrench and a strip of tape. That's the whole price of knowing how to stop a gas leak at the source.

By Wes Dunbar · Country & Skills6 min read
Find your gas shut-off before you need it

Quick answer: If you smell gas, get everyone out first and contact your gas utility and the fire department from a safe distance. The shut-off at your meter is a quarter-turn valve. Learn where it is today, keep a wrench near it, and never turn the gas back on yourself.

The valve you've walked past a thousand times

Your gas meter has been sitting outside since you moved in, minding its business. Near it, on the pipe, is a valve. That valve is the difference between a leak somebody stops in thirty seconds and one that keeps feeding itself until the crew arrives.

Most people can't say where it is. Go look right now. It's usually on the supply pipe just before the meter, on the side of the house or in a utility alcove. Note the three things that go wrong on the first visit:

  • A hedge, a trash can corral or a stack of firewood is sitting in front of it.
  • The pipe has been painted so many times the valve looks like part of the plumbing.
  • You find a locked cage or cover, which means your utility controls access and you need to know their rules.

A found valve is a start. Now check how it moves.

Reading the valve

On a standard residential valve, the handle or tab runs parallel to the pipe when gas is flowing. Turn it a quarter turn so it sits crosswise to the pipe and the gas is off. That's the whole mechanism. No dials, no code.

Most meter valves are a flat steel tab, not a handle, and they're made to be turned with a wrench. Utilities commonly suggest an adjustable wrench around twelve inches. Check what yours recommends, because meter designs vary. Look for the little hole or notch in the tab as well. On some meters that's where a utility lock goes.

Two cautions:

  • Don't test it by turning it off to see if it works. Turning the gas off in your house means somebody has to come relight and inspect things. Learn the position and the motion without doing the deed.
  • If the valve looks corroded, stuck or leaky, don't force it. Tell your utility. They want to know before a bad day.

Where the wrench lives

A wrench in the garage toolbox, forty feet and two doors from the meter, is a wrench you won't have in the moment. Buy a cheap twelve-inch adjustable one just for this. Zip-tie it to the pipe near the meter if the utility allows, or hang it on a hook inside the nearest door. Wrap a strip of bright tape around the handle and write GAS in marker.

Then do what BRO readers should do with every borrowed or shared tool: leave it better than you found it. Wipe the valve, clear the weeds, trim the shrub that's crowding it. The next person to reach for that valve might be your wife or a neighbor in a hurry. Make it easy for them.

Put a card in your seventy-two hour kit with one line: "Gas shut-off: east side of house, quarter-turn crosswise, wrench on hook." Everyone in the house should be able to read it and do it.

What an actual leak looks and smells like

Utilities add a sulfur-type odor to natural gas so you can't miss it. People describe it as rotten eggs. Other signs:

  • A hissing or whistling near a pipe, meter or appliance.
  • Bubbles in standing water or wet ground outside.
  • Dead patches of grass or plants in an otherwise healthy yard.
  • A damaged line after digging, a storm or an earthquake.

If you smell gas indoors, the order matters:

  1. Don't flip switches, light anything or run electronics. A spark is all it takes.
  2. Get everyone out, pets included, and leave the door open behind you if it costs no time.
  3. Move well away from the building before you use a phone.
  4. Contact your gas utility and the fire department from there, or from a neighbor's house.
  5. Stay out until they've cleared the house.

The meter valve is for the version of the story where you're already outside, the meter is well away from the leak, and you know how to shut it. It isn't a reason to go back in. If you're dizzy, nauseated, have a headache or feel off after exposure, get medical help right away. That could be a carbon monoxide problem as well, and your gas shut-off won't answer it.

When shutting it off makes sense

Beyond a smell, there are times when a precautionary shut-off is the cautious call:

  • After an earthquake, if you smell or hear gas or suspect damage to lines.
  • After a flood or a major storm that has shifted the house or the meter.
  • Before a long absence or a repair, if a plumber tells you to.
  • When a contractor hits the line. Everybody out, then shut it off if it's safe to reach.

A fallen tree on the meter, though, is a leave-first, report-second situation. Don't go wrestling with a damaged meter.

The part nobody tells you: you can't turn it back on

Once the valve is crosswise, you don't reopen it. Your utility sends a technician to check for leaks, relight pilots and restore service. After a local incident that can be a few hours. After a regional disaster, it can be days, because a lot of homes are in the same line.

Plan for that. No gas means no furnace, no gas water heater, no gas stove. If you've read what a week without power actually takes, you've already thought about food and light. Add warmth and hot water to the list. If you keep a camp stove or propane heater for outages, they're for outdoor or properly ventilated use as the manual says, never inside a closed house. And if you run a generator, keep it far from the house. The generator rules cover distances.

Appliance valves, propane and apartments

Each gas appliance (stove, water heater, furnace, dryer) usually has its own shut-off valve on the supply line behind or beside it. Same logic: handle in line with the pipe is open, crosswise is closed. Find them. If the problem is one appliance, closing its valve isolates it without cutting the whole house. Still leave the building if the smell is strong.

Propane is different in one respect. Propane is heavier than air, so it pools low instead of drifting up. The tank valve closes by turning it clockwise. The smell is similar. The leave-first rule is identical. Your supplier can show you the setup on your tank.

Renters and condo owners: you may not control the meter at all. Ask the manager or maintenance office where the building shut-off is and who has authority over it. Learn your own appliance valves. Then ask in writing, so there's a record, what the plan is if you report a smell at 2 a.m.

Ten minutes this weekend

Walk to the meter. Clear the space. Hang the wrench. Tape the card in the kit. Show your wife and your teenagers the motion, without turning anything. Check your utility's website for its own guidance and for any leak-detection or shut-off valve program. If you want an automatic shut-off valve or a gas detector, ask a licensed plumber or your utility what fits your home.

You'll spend an afternoon on this once. The day you smell gas, you won't have to figure out anything.

Wes Dunbar

Country & Skills

Grew up on an acreage and never quite left. Covers trucks, trades, land, and how to do the thing yourself.

Watch

Worth an hour of your evening

More from Preparedness.

From channels we rate. Plays on YouTube.

    PreppingRicanNov 9

    No Power in Winter? How to Stay Warm in an Apartment Without Carbon Monoxide Risks

    Power Out PlaybookNov 12

    Power Outage Survival: 7 Steps for the First Hour and the First Night

    Living With No PowerNov 19

    Winter Heating Safety: Stay Warm in a Power Outage — Without the Silent Killer

    EkologyaNov 9

    How to Disinfect Water With Bleach (Exact Drops, EPA Method)