Skip to content
GuideEvergreen guide

The shoulder seam tells you if a work shirt will fight you

Chest size gets you in the door. The shoulders decide whether you can reach, lift and swing all day without the shirt pulling back.

By Tobias Reed · Style & Grooming5 min read
The shoulder seam tells you if a work shirt will fight you

Quick answer: The shoulder seam should land on the bony point at the top of your shoulder, within about half an inch. Then reach forward, reach overhead and hug yourself in the fitting room. If the fabric binds anywhere, put it back.

Stand in front of a mirror with your arms hanging. Find the hard, rounded point at the top of your shoulder. Now look at where the seam of your shirt sits.

If it's out on your upper arm, the shirt is too big. If it's creeping up toward your neck, it's too small. Right on the point is the goal.

Most guys never check. They buy by the number on the tag, which tracks chest and nothing else, and then wonder why a jacket that felt fine on the rack fights them the minute they lift a tailgate.

Why the shoulders are the whole game

Every other part of a work shirt can be forgiven. A waist can be tucked. A hem can be cut. Sleeves can be shortened by a tailor or a patient wife with a sewing machine.

Shoulders can't be fixed cheaply. Rebuilding them means taking the garment apart, and almost nobody will do it for a price that makes sense. So you get this one right in the store or you live with it.

Too big and too small go wrong in different ways.

Too tight. The fabric stretches across your back when you reach forward. You feel it as a tug between the shoulder blades, usually while you're doing something awkward, like pulling a hose across a yard. Seams strain there first. A tight shoulder is where a shirt starts to rip.

Too wide. This is the sneakier one, and it's what happens when you size up for room. The seam droops down your arm, and now there's a pile of fabric under the armpit that bunches every time you raise your hand. Lift your arm and the whole garment rides up with it. You don't gain freedom. You gain slack that gets in the way.

The three-motion test

Do this in the fitting room. Feel silly for ninety seconds and save yourself a year of irritation.

  1. Reach forward, both arms out like you're gripping a steering wheel. Your back should feel like it has room, and the cuffs shouldn't slide more than an inch up your forearm.
  2. Reach overhead, like you're putting a box on a high shelf. The hem shouldn't leave your belt line by more than a couple of inches, and nothing should choke your armpits.
  3. Hug yourself, crossing your arms in front of your chest. This is the best tell for the back. If it's tight here, it'll be tight when you swing a maul or push a wheelbarrow.

If you can only do one, do the third. Most guys never check the back of a shirt, and that's where fit actually fails.

Fabric changes the answer

A soft cotton flannel forgives a lot. A rigid duck canvas jacket forgives nothing, at least for the first month. Canvas that feels snug in the shoulder today will loosen as it breaks in, but don't count on it fixing a real problem. Stiffness hides a bad fit for a few weeks and then the fit shows up anyway.

Look for the features built for movement. Some work jackets have gussets, which are extra panels sewn under the arms. Others have an articulated back, with pleats or a yoke across the shoulder blades that opens up when you reach. These cost a little more and they're the difference between a jacket that works with you and one you wear in spite of itself.

I wouldn't pay extra for a brand name. I'd pay extra for a gusset.

If the jacket is going to be your outer layer in cold weather, our piece on buying the work jacket once and wearing it for ten years covers the construction side. And if you're wondering why your flannel isn't doing much when the temperature drops, this one explains it.

Wear the layer you'll actually wear

Try the jacket on over a hoodie or a thermal. You're going to wear it with something under it, so test it that way.

But don't size up the shoulders to fit the layer. This is the usual mistake. A guy holds a jacket over his sweatshirt, feels it bind, grabs a bigger size and ends up with a shoulder seam halfway down his bicep. Better to find a cut that fits you in a shirt and has some room in the body. Some makers sell a "relaxed" or "loose" fit that adds room through the chest and waist while keeping the shoulder in the right place. That's the one you're hunting for.

When you're built off-the-rack wrong

Some guys have shoulders broad for their chest, and some have narrow shoulders and a big middle. Neither is a flaw. Both make shopping a pain.

If you're broad through the shoulders, look at big and tall cuts or a size up in a stretch-woven fabric. A touch of elastane in the shirt can give you a bit of mercy across the back. If your shoulders are narrow, don't buy a size down and cinch it. Go slim-fit or try the youth-to-men's sizes in a hardware store, where the cut is often a little narrower. Nobody will check the tag, and the only person it has to work for is you.

Long arms are a separate problem. Tall sizes give you extra length in the sleeve and body. A sleeve that rides up past your wrist bone when you reach forward is too short, and it'll irritate you every single day.

Where a tailor does help

Sleeves can be shortened. Hems can be taken up. Side seams can be taken in on a shirt that's too boxy. Those are cheap, quick fixes and a decent seamstress can do them in an afternoon.

What a tailor can't do is rescue a shoulder. If the seam is in the wrong place, the garment is wrong. Don't spend money on a jacket you already know doesn't fit.

Buy it and then leave it better

Once you've found the one that moves right, treat it right. Wash it cold, hang it to dry and fix a loose button before it becomes a missing one. A jacket that fits like this is worth keeping for years, and it will repay a little care. The same goes for your jeans, where fit through the seat and thigh does for your legs what the shoulder does for your arms.

Fit the shoulders first and the rest falls in line. Buy the number on the tag and you'll spend the day tugging at your sleeves.

Tobias Reed

Style & Grooming

Spent a decade in menswear retail watching men buy the wrong size. Believes fit is ninety per cent of it and says so weekly.

Watch

Worth an hour of your evening

More from Country Style.

From channels we rate. Plays on YouTube.

    Lance AutreyMay 9

    The Ultimate Boot Guide (What to Buy and When to Wear)

    Texas Country Western BootsJun 11

    What should be your first pair of cowboy boots?

    Real Men Real StyleFeb 15

    Never Wear a Suit Without Cowboy Boots (Here’s Why)

    Real Men Real StyleNov 17

    Stop Wearing Cowboy Boots Wrong (How To Rock Western Boots AUTHENTICALLY)